Wichtig: Der Text wurde automatisch aus dem PDF extrahiert, weshalb Schreibfehler durchaus vorkommen können.
... SPRITE Wheels: Change over the wheels diagonally (including the spare wheel) in order to obtain maximum service with even wear from each tyre. Contact Breaker Points: Clean the contact breaker points. Cleaning of the contacts is made easier if the contact breaker lever carrying the moving contact is removed. Before replacing, smear the pivot on which the contact breaker operates with engine oil. Check and reset the contact breaker points to the correct gap of .014 to .016 in. (.36 to .41 mm.) (see page 43). Sparking Plugs: Remove the plugs and clean off all carbon deposit from the electrodes, insulators and plug threads. Reset the plug points to the correct gap of .025 in. (.64 mm.) (see page 31). EVERY 6,000 MILES (10,000 km.) Gearbox: Drain when the oil is warm (i.e. after using the vehicle) and refill to the level of the filler plug with new oil. Capacity 2\ pints (1.33 litres). Rear Axle: Drain when the oil is warm, and refill to the level of the filler plug opening with new oil. Capacity If pints (1.00 litre). Engine OH Filter: At the same time as the engine oil is changed, drain the fullflow filter and renew the filter element, not for getting to topup the filter container with new oil before refitting it to the head casting on the engine crankcase (see page 38). N.B.: On no account must this attention be neglected as it is essential ...